How to Install the Crystal Ceiling Lamp?

December 01,2022

Crystal ceiling lamp belongs to a kind of ceiling lamp. The production process is mainly made of crystal, which is absorbed or embedded in the roof ceiling. It has the characteristics of beauty and nobility and is used in high-end places such as hotels and villas. It is divided into traditional crystal ceiling lamps and LED crystal ceiling lamps.

Because of the impact of national low-carbon lighting and energy conservation and emission reduction, LED has been widely used in the lighting industry, as well as in the field of crystal ceiling lamps. LED crystal ceiling lamp has been greatly developed. It is mainly because the light source adopts LED lamp beads. At the same time, it can control the color of the light source to achieve a colorful effect. However, it cannot show the characteristics of the crystal lamp. Because it does not use an incandescent light source, it cannot produce the unique refraction and flickering effect of the crystal lamp.

6 (5)_副本.png

Method of installing crystal ceiling lamp

Determine the installation position on the ceiling of the room, and embed bolts, or fix with expansion bolts, nylon plugs, or plastic plugs, generally using expansion bolts;

When expansion bolts are used for fixation, the bolt specifications shall be selected according to the technical requirements. The drilling diameter and burial depth shall be consistent with the bolt specifications;

Before the installation of the crystal ceiling lamp, check the cross-section of the wire core leading to each lamp decoration. The copper core flexible wire shall not be less than 0.4 mm2, and the copper core shall not be less than 0.5 mm2, otherwise, the lead must be replaced; The connection between the wire and the lamp holder, and the connection of the parallel wire between the lamp holders shall be firm, and the electrical contact shall be good, to avoid the danger caused by sparks between the wire and the terminal due to poor contact;